OVERRIDE FUNCTION
This function is intended to be used to manually override the current operation of the heater, For example; if the heater is in standby mode (i.e. between finishing time and starting time of a Timer), and the Override button is selected, then the heater will begin to operate, and heat the room.
1
To operate the Override simply press the Override button. The Override indicator will flash.
| AM |
Timer 1 Timer 2 Override | PM |
|
Set ・ Room
Temp
・
Time
2
To manually deactivate the Override simply press the Override button again. The Override indicator will go out, and the heater will return to standby mode.
| AM |
Timer 1 Timer 2 Override | PM |
|
Set ・ Room
Temp
・
Time
The heater will continue to operate on Override until the Override button is pressed again, or one of the Timers takes over the operation of the appliance. This means that the Override mode will automatically drop out if a programmed Starting time is reached. The appliance will then return to operating at times programmed into the Timer(s).
USING THE REMOTE CONTROL
To Turn ON or OFF
Remote Control will not turn heater ON if Timer(s) have been selected.
To manually operate when Timer(s) are not
To Change Temperature
To alter the temperature at any time
selected, simply press
ON
while the heater is
the ON or OFF button.
OFF
operating, simply press the “▲” or “▼” buttons.
If the Timer(s) have been selected, and the heater is in standby mode, and the OFF button on the Remote Control is pressed, the Timer(s) will be deactivated.
– 18 –