PROGRAMMING THE ON/OFF TIMER(S)
Before programming the Timers you must ensure that the clock has been set to the correct time. See page 14.
As an example let’s programme Timer 1 to heat the room by 7:10 AM and finish at 9:00 AM.
1
Press the Set Times button twice. The Digital Display will show AM 6:00. Timer 1 indicator will flash.
AM | Clock | |
Timer 1 | ||
PM | ||
on off | ||
Set ・ Room | Timer 2 | |
| ||
Temp | Set times | |
・ | ||
Time |
|
2
AM |
| Clock |
| Timer 1 | |
PM |
| |
| on off | |
| Set ・ Room | Timer 2 |
|
|
Press the “ | ” button until AM 7:00 appears, release | Temp |
|
| Clock |
|
| ・ | Set times | AM |
|
the button, then press it again until AM 7:10 appears. | Time |
| Timer 1 | ||
| 2 Override | PM | |||
| Timer 2 | ||||
|
|
|
| on off | |
(Press the “ | ” button if you go past AM 7:10.) |
|
| Set ・ Room |
|
|
| Temp | Set times | ||
|
|
|
| ・ | |
Time
3
Press the Set Times button again, the Timer 1 OFF indicator will flash. Press the “
” button until AM 9:00 appears.
AM | Clock | |
Timer 1 | ||
PM | ||
on off | ||
Set ・ Room | Timer 2 | |
| ||
Temp | Set times | |
・ | ||
Time |
|
4
Press the Set Times button three times to lock in the programmed time. The Digital Display will show the current time. A small indicator on the Digital Display will flash to show that the Display has returned to the clock.
AM | Clock | |
Timer 1 | ||
PM | ||
on off | ||
Set ・ Room | Timer 2 | |
| ||
Temp | Set times | |
・ | ||
Time |
|
TURN TO NEXT PAGE TO OPERATE THE TIMERS.
TIMER 2 is programmed in the same way, remember to ensure that the Timer 2 indicator is flashing when you programme in the desired setting.
The Timers can be programmed to operate for any two periods in any 24 hours. Turn to next page to operate the dual timer.
The programmed time must be selected and
– 15 –
