LOCATION
When positioning the heater the main points governing the location are:
1.Flueing
2.Warm air distribution
This heater must not be installed where curtains or other combustible materials could come into contact with it.
In some cases curtains may need restraining.
See diagram for other recommended clearances.
300
50
50
1000
(mm)
This heater is not designed to be built in.
The flue is not designed to be positioned under floors, or below the level of the heater.
Flue
Terminal
Flue
Terminal
Flue fittings must be kept clear of flammable materials.
The flue terminal should be positioned away from flammable materials.
LP GAS
Flue Terminal
– 24 –