FITTING UNIT
AIR INLET HOSE
a
b
Attach the Air Inlet Hose to the flue manifold on either inlet position a or b. The unused inlet is plugged with the rubber cap supplied on the manifold.
EXHAUST PIPE & LOCKING CLAMP
The following components can be fitted by reaching down the rear of the appliance as it is positioned against the wall.
1.
Manifold
Connect the flue elbow to the manifold by moving the appliance into position.
2.
Locking clamp
Hook
| Elbow |
Manifold | Locking Clamp |
|
Fit the locking clamp over the connection between the flue elbow and the manifold. Engage the hook and rotate it until it snaps against the body of the clamp.
3.
Locking clamp
Manifold
Elbow
4.
Fit Clip
Slide
Sock
Slide the insulation sock up to the flue manifold and slip the securing clip over the sock as shown.
– 31 –