REMOTE CONTROL
TO REPLACE BATTERY | Simply open the back of the remote control and replace Lithium battery. TYPE: CR 2032 |
|
|
BUTTON | the heater | manually. |
ON | Operates | |
|
|
|
OFF BUTTON | Stops heater manually. |
|
|
|
|
ON | OFF |
BATTERY | Power source | for operating | remote control. |
|
|
|
|
|
|
|
|
| 3 | 2 | |
OPEN | |||
| |||
0 |
| ||
| 2 | ||
| R | ||
| C | ||
|
TEMPERATURE ADJUSTMENT | Increases or decreases | the temperature setting. |
|
|
|
|
|
|
REVERSE
FRONT
■NOTE
Some fluorescent lights may interfere with the transmission of remote control signals, in this case changing the position from which you are operating the remote control may help.
Avoid leaving the remote control in direct sunlight and do not place the remote close to the louvres of the heater.
Avoid getting the remote control wet, or dropping it.
The remote control works within 5 metres and an angle of 40˚ to the receiver on the heater.
Only use the battery type specified. (CR 2032).
Remove battery if control is not going to be used for a long period. This will help to avoid damage from leaking batteries.
– 4 –