INSTALLATION INSTRUCTIONS
Specification
Input: | 3.4kW | Burner: | Stainless Steel Bunsen Type |
Ignition: | Continuous Spark | Gas Inlet: | 1/2 in. BSP |
Flue: | Forced Flue (Components supplied separately.) | ||
Gas Control: | Rinnai Electronic Modulating Control |
| |
Electrical Supply: | 230V, 50Hz. This unit has a supply lead and 3 pin plug. | ||
Remove parts from carton and check that all parts shown below are included in the installation kit.
|
| Flue Locking | 1 | |
|
| Clamp | ||
|
|
| ||
|
| Insulation | 1 | |
|
| Clip | ||
Back Spacer |
|
| ||
1 |
|
| ||
Set |
|
| ||
| Plastic Tie |
| ||
|
| 2 | ||
|
| for air inlet | ||
|
|
| ||
|
| Hose Clip | 1 | |
|
| M4 for |
| |
Wall Bracket | 1 | Securing | 3 | |
|
| Flue |
| |
Spacer | 1 | M4 for Air | 2 | |
Bracket | Intake Clip | |||
|
| |||
M4 for Back | 10 | M4.8×32 |
| |
wood screws |
| |||
Spacer Set |
| |||
| for wall | 5 | ||
|
|
Customers Installation and | 1 | bracket and | |
flue manifold. | |||
Operating Instructions | |||
| |||
|
|
Check the unit supplied is correct for the gas type in your area.
Refer to local gas authority for confirmation of gas type if in doubt.
Refer to data plate located inside the front panel.
Check for damage, if the unit is damaged contact your supplier of Rinnai UK.
Do not install a damaged unit before checking with your supplier.
Refer to an approved pipe sizing chart if in doubt about size of gas pipe.
– 23 –
