Rinnai RHFE-308 FTR user manual CARING FOR YOUR NEW RHFE-308FTR, Do Not Use Solvents

CARING FOR YOUR NEW RHFE-308FTR

This appliance is controlled by a micro computer. If there is something wrong with the appliance then it will stop, as it is protected by the following safety devices.

Ignition Safety Device	Power Failure Safety Device
Burner Safety Device	Power Surge Safety Device
Overheat Safety Device	Fan Delay Safety Device

Your RHFE-308FTR requires very little maintenance, simply clean the rear fan filter once a week and wipe the outer case and louvre section with a damp cloth.

DO NOT USE SOLVENTS.

Solvents may melt or distort plastic parts.

Problem

Cause

Not Plugged In

Power Cut

(Initial Installation) Air in gas pipe

Gas Filter Blocked

Missed Ignition

Flue terminal obstructed Flue manifold not connected Louvre obstructed

Air filter blocked

Gas Escape

On Timer is set

Child Lock set

Gas turned off at meter Battery flat (remote control)

No ON indicator Burner doesn't ignite Unusual combustion Combustion stops during operation Smell of gas Noisy ignition Takes too long to warm the room Remote control doesn't work

Remedy

Plug In

Re-ignite manually after power is restored

Purge air (Installer)

Service Call

Service Call Clear obstruction Service Call Clear obstruction Clean filter (weekly) Service Call Cancel On Timer Cancel Child lock Turn gas on Replace battery

– 19 –