Elo TouchSystems 3243L user manual Parameter Available Adjustment Brightness

Page 15

Button

Function when OSD is not displayed:

Function when OSD is displayed:

Menu

Display OSD main menu

Return to previous OSD menu

 

Display OSD Brightness submenu

Increase value of selected parameter /

 

select previous menu item

 

 

 

Display OSD Contrast submenu

Decrease value of selected parameter /

 

select next menu item

 

 

Select

Auto Adjust

Select parameter for adjustment /

select submenu to enter

 

 

Using the OSD buttons controls an on-screen graphical user interface which displays on top of

your input video, allowing intuitive adjustment of the following display parameters:

Parameter

Available Adjustment

Brightness

Increase/decrease monitor brightness.

Default: maximum

 

Contrast

Increase/decrease monitor contrast.

Default: best gray-shade performance

 

Clock

Allows fine adjustments of the panel’s pixel dot clock.

Only applicable for VGA input video

 

Phase

Allows fine adjustments of the panel’s pixel dot clock phase.

Only applicable for VGA input video

 

Auto Adjust

Automatically adjusts the system clock to the input analog VGA video signal, affecting

the H-position, V-position, Clock, and Phase menu items.

 

Only applicable for VGA input video

H-position

Moves the image horizontally on the display in single-pixel increments.

Default: centered.

 

Only applicable for VGA input video

V-position

Moves the image vertically on the display in single-pixel increments.

Default: centered.

 

Only applicable for VGA input video

 

Switches the scaling method between Full Scaling and Maintain Aspect Ratio.

 

Default: Full Scaling

 

Full Scaling – scales the X- and Y-dimensions of the input video (up or down as

 

needed) to the display’s native resolution.

Aspect Ratio

Fill To Aspect Ratio – Assuming a landscape orientation and an input video with aspect

ratio smaller than 1920 x 1080, scales the Y-dimension of the input video (up or down

 

as needed) to the display’s Y-resolution, and scales the X-dimension to maintain the

 

input video’s aspect ratio (and fills the rest of the display with equal black bars on the

 

left and right).

 

The touchscreen may need recalibration when switching between Aspect Ratio

 

options.

Sharpness

Adjusts sharpness of the displayed images.

Default: no sharpness adjustment

 

Only applicable at non-native input video resolutions

User Manual: 3243L

SW601960 Rev A, Page 15 of 26

Image 15
Contents Elo Touch Solutions 3243L Touchmonitors Copyright 2012 Elo Touch Solutions, Inc. All Rights Reserved Table of Contents Precautions IntroductionProduct Description Unpacking the Touchmonitor InstallationConnector Panel & Interfaces Touchmonitor Connections Installing the Touch Technology Software Drivers SW601960 Rev A, Page 8 SW601960 Rev A, Page 9 Mounting General Mounting InformationSide Bracket Mount Rear Vesa Mount IntelliTouch Plus Touchscreen Technology PowerOperation TouchGesture Support On-Screen Display OSD VideoParameter Available Adjustment Brightness Color OSD and Power LockoutsTechnical Support Solutions to Common ProblemsTechnical Assistance Safety & Maintenance SafetyCare and Handling Waste Electrical & Electronic Equipment Directive Weee Electrical Safety Information Regulatory InformationII. Emissions and Immunity Information SW601960 Rev A, Page 22 IV. China RoHS III. Agency CertificationsSW601960 Rev A, Page 24 Warranty Information Check out Our Website Getting in Touch with us