Dolby Laboratories KDC-W8534 instruction manual Accessories/ Installation Procedure

Page 49

Accessories/ Installation Procedure

Accessories

1

..........1

2

..........2

3

..........1

4

..........1

Installation Procedure

1.To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery.

2.Make the proper input and output wire connections for each unit.

3.Connect the wire on the wiring harness.

4.Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle.

5.Take Connector A on the wiring harness and connect it to the external power connector on your vehicle.

6.Connect the wiring harness connector to the unit.

7.Install the unit in your car.

8.Reconnect the - terminal of the battery.

9.Press the reset button.

•If the power is not turned ON (or it is ON, but will be OFF immediately), the speaker wire may have a short-circuit or touched the chasis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked.

•If your car is not prepared for this special connection- system, consult your Kenwood dealer.

•Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug.

•Make sure that all wire connections are securely made by inserting jacks until they lock completely.

•If your vehicle’s ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the unit’s power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key.

•If the fuse blows, first make sure that the wires have not caused a short circuit, then replace the old fuse with one with the same rating.

•Insulate unconnected wires with vinyl tape or other similar material. To prevent short circuits, also do not remove the caps on the ends of the unconnected wires or the terminals.

•Connect the speaker wires correctly to the terminals to which they correspond. The unit may receive damage or fail to work if you share the - wires and/or ground them to any metal part in the car.

•After the unit is installed, check whether the brake lamps, indicators, wipers, etc. on the car are working properly.

•If the console has a lid, make sure to install the unit so that the faceplate does not hit the lid when closing and opening.

•Mount the unit so that the mounting angle is 30° or less.

English 49

B64-3304-00_01_E_English.indd 49

05.11.15 2:36:00 PM

Page 48 Page 50
Image 49
Page 48 Page 50
Contents KDC-W8534 Contents CD Read Setting Picture downloading Voice Index Date Mode Synchronize ClockMenu system Auto TP Seek Monaural ReceptionTo prevent injury or fire, take the following precautions Safety precautionsAttach the panel while you are on the vehicle Do Not Load 3-in. CDs in the CD slotCleaning the Faceplate Terminals Cleaning the UnitBefore using this unit for the first time About ODD Offset Dual Differential D/A SystemAbout Media Manager of PC application attached to KDC-W8534 Marking of products using lasers Except for some areasAbout CDs About AAC, MP3 and WMA Setting each function What is the Multi-function Key System?Displaying the desired function Real operational example of the Multi- function Key SystemPower General featuresVolume Selecting the SourceAudio Control AttenuatorSubwoofer Output Enter Audio Setup mode Audio SetupSelect the Audio Setup item to adjust Press the VOL knob Exit Audio Setup mode180/220/250 Hz DTA Front/DTA Rear 610 cm DTA Subwoofer Position Setting12/-18/-24 dB/oct 250 Hz/ThroughSound Management system Cabin SettingPassenger Van 16cm/ 20cmSelect the items to adjust for Equalizer Sound setting DisplayAdjust the Equalizer Equalizer ControlBypass Control WOW ControlMemory Recall mode Memory modeRecall the value in the memory by the memory mode Storing the values of Field Control in memoryTheft Deterrent Faceplate Faceplate Angle AdjustmentTEL Mute Display Type Selection Changing the display modeWallpaper selecting Graphic part Display SwitchingSelect the wallpaper display Select the wallpaperTuner source Text Selection for DisplayAudio file source Standby/ Auxiliary input sourceSelect the text display part Text Display SwitchingText display in the Upper text display part Tuner source CD & External disc sourceText display in the Lower text display part Tuner source Text display in the Middle text display part Tuner sourceFont Color Select External Display SwitchingSelect the Font Color Push the Control knob towards 4 or ¢ Select the display Push the Control knob towards 4 or ¢Tuning Tuner featuresDirect Access Tuning Cancelling Direct Access TuningPreset Tuning Station Preset MemoryAuto Memory Entry Traffic Information RDS featuresRadio Text Scroll Receiving other traffic information stationsPresetting the Program Type Program Type presetRecalling the preset Program Type PTY Program TypeSelecting the Program Type display language Changing Language for PTY FunctionPlaying CD & Audio file CD/Audio file/External disc control featuresFast Forwarding and Reversing Playing External DiscTrack/File Search Disc Search/Folder SearchScan Play Track/File/Disc/Folder RepeatRandom Play Magazine Random PlayCancelling the Folder Select mode Cancelling the All Random PlayAll Random Play Folder SelectSelect the Play mode Press the 1 S.MODE button Switching the Play modePlay mode Cancelling the Letter SeekDisc Naming Dnps Exit Menu mode Press the Menu buttonPlay the disc you want to attach a name to Select the charactersText/Title Scroll Menu system You can continue by returning to and setting other itemsSelect the Beep display Set the menu item Push the Control knob towards 4 or ¢Display Setting Turn the power onSecurity Code Touch Sensor ToneDate Adjustment Manual Clock AdjustmentDate Mode DSI Disabled System IndicatorDual Zone System Setting Built-in Amp SettingSelectable Illumination Display Illumination ControlS. Frequency Offset S. Bass Management SystemAMP Control Tuning Mode News Bulletin with Timeout SettingLocal Seek AF Alternative FrequencyRestricting RDS Region Region Restrict Function Auxiliary Input Display Setting & Disc NamingAuto TP Seek Monaural ReceptionPower OFF Timer Built-in Auxiliary input SettingCD Read Setting Selecting Russian CharactersPicture downloading Cancelling DownloadingInsert a CD-R/CD-RW QuantityVoice Index Demonstration mode SettingACDrive firmware version display Unique ID displayLoading and Replacing the battery Basic Operations of remote controlBasic operations Tuner source Dual Zone SystemDisc source Accessories Installation Procedure Accessories/ Installation ProcedureConnecting Wires to Terminals Connecting the ISO Connector Connector Function GuideIgnition cable Red Pin Red Unit Installation InstallationScrewing the Faceplate on the Unit Firewall or metal supportAccessory2 Removal tool Lock Catch Accessory2 Removal toolRemoving the Unit Removing the hard rubber frameIgnition and battery wire are incorrectly connected Troubleshooting GuideTEL mute wire is not connected properly GeneralDisc source Tuner sourceCD is quite dirty For the discs first or last songMessages shown below display your systems condition Audio file sourceWhen the temperature inside Hold ErrorPlay having no disc names preset Automatic disc changer exceeds 60CSpecifications B64-3304-0001EEnglish.indd 05.11.15 23605 PM B64-3304-0001EEnglish.indd 05.11.15 23605 PM

KDC-W8534 specifications

Dolby Laboratories is renowned for its commitment to advancing audio technology, and one of its standout products is the KDC-W8534. This device exemplifies the fusion of innovation and quality audio performance, specifically designed to enhance the listening experience across various platforms.

The KDC-W8534 is engineered with advanced sound processing capabilities, allowing users to enjoy a rich audio environment. One of its primary features is the Dolby Digital support, which delivers immersive surround sound for movies, games, and music. This technology enables a multi-dimensional audio experience, making users feel as though they are part of the action, rather than just passive listeners.

Another hallmark of the KDC-W8534 is its robust connectivity options. It comes equipped with Bluetooth technology, enabling seamless wireless streaming from smartphones and other devices. Users can easily connect, play their favorite tracks, and even take calls without the hassle of tangled wires. This convenience is complemented by compatibility with various audio formats, ensuring enthusiasts can enjoy their media without compromise.

The KDC-W8534 also integrates features like advanced equalization settings. These settings allow users to customize sound profiles based on their preferences or particular environments, ensuring optimal audio output whether in a car, home theater, or any other space. The clear LCD display provides easy navigation through menus and tracks, enhancing user experience.

Built with durability in mind, the KDC-W8534 boasts a sleek yet sturdy design, making it a long-lasting addition to any audio setup. The user-friendly interface combined with tactile buttons ensures ease of operation, even while on the move.

In essence, the Dolby Laboratories KDC-W8534 is a powerful audio solution that encapsulates the brand's dedication to superior sound quality and user-centric design. Its combination of cutting-edge technologies, comprehensive connectivity, and customization features makes it a preferred choice for audio enthusiasts looking to elevate their listening experience. Whether indulging in cinematic audio, enjoying music, or gaming, the KDC-W8534 promises to deliver clear, immersive sound that enhances every moment.
Top Page Image Contents