Control Functions (cont.)
11Subwoofer Level Control and Port
Switch should be set to “OFF” when control circuit is not installed, (see optional “subwoofer level control” owner’s manual).
cover panel
12Status LED Indicators
GREEN indicates the normal operating condition; the amplifier is “ON.” GREEN and RED together are normal when the amplifier is first turned “ON”; RED will turn off after a few seconds. When both GREEN and RED remain on, the ampli- fier is in thermal shutdown condition. RED only indicates a fault condition, “SAFE.”
Mechanical Functions
Recessed RCA Inputs
The input jacks are recessed into the body of the amplifier to provide clear-
ance in tight mounting locations.
1 inch
1 inch
Control Cover Removal and Reinstallation
The cover panel is secured with two (2) captive
Multi-position Mounting Feet
The mounting feet are designed to slide in both directions to clear installation obstructions on the mounting surface.
WARNING! Before driving the mounting screws through any surface, be sure of what is behind that surface. Check for the gas tank, brake lines, and any vehi- cle wiring harness.
6