WATCHING THE VIDEO MONITOR IS FORBIDDEN WHILE DRIVING:
The “PARKING BRAKE” wire must be connected to the parking brake system of your car. The LCD screen will display video images ONLY when the parking brake is engaged.
If the parking brake is not engaged, the screen will display the message “DISABLED WHILE DRIVING”. This is a safety feature designed to prevent the driver from watching a video while driving. The video output of this unit is not affected by this.
Note: In Radio Mode or CD/MP3 Mode images will be displayed on the monitor whether or not the parking brake is engaged.
Connecting the Parking Brake line to the parking brake system built in the car
Parking Brake line (Pink/Black)
Parking brake indicator Light
Parking Brake
Car Battery
Parking Brake switch
(Inside the car)
To metallic body or chassis of your car
Connecting the reversing line to taillight on the car
Taillight line
To reversing line
To taillight
To Car Battery
Taillight
After connecting, at power on state, when you start up the reverse gear, the unit will receive the picture from car rear view camera.
User’s Manual - page 8