INSTRUCTIONS
VIDEO SETTING ON TOUCH SCREEN
You can choose: Brightness, Contrast, Color, Hue, adjust the image effect according to your sight. The blue bar will show your level.
INSTRUCTIONS
Calibration to re-gain touch
+Please follow the below instructions to calibrate when there is no touch or touch is not accurate.
Step 1 :Press the mode button in the unit to switch to DVD mode.
Step 2: Insert a DVD disc, after DVD is loaded, press the stop button " ~ "
(as show in picture 1.) in the remote short, the unit will display as show in picture 2.
,1
Picture ( 1 ) | Picture (2) |
Step 3: Press " 8 "in the remote as show in picture (3), the unit will display as show in picture (4)
. Picture ( 3 ) | Picture (4) |
Video mode: When using this
function, the position will be darker
on the Screen.
Image mode: You can choose the area in the broken line on the panel, standard, defined, soft, according what you need to choose, the blue back light will disappear.
Step 4 :Press" .A. "button in the remote and then quickly press" T "button and you will enter the touch calibration interface.
J | Picture (5) | Picture (6) |
|
|
Step 5: User the touch pen to touch the center of the cross cursor, the cross cursor will move I) from the center to top left comer, top right comer, right down, left down, when the
cross cursor stop at each comer, touch the center of the cursor. Then the panel will display OK and leave the calibration interface and the trnitregained touch.
|
|
| 6" |
|
|
|
| '~ | ~~ |
|
|
|
|
|
|
| = |
|
| ||
|
| ~ | ~ | ~ |
| ~ |
|
| ||
! ... | . , I'Ii - | 'I |
|
| : | ~ | I .= | ~~ | I | |
|
|
| D D |
|
|
|
| |||
|
|
| Picture (7) |
|
|
|
|
|
|
|
22 | 23 |