SETUP – MK1517GAP (HDD2157)

Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive.

Master/Slave Settings

Your Toshiba Hard Disk Drive can be configured as either a "Master" or "Slave" unit. Master configuration is used for all single drive applications, and master or slave configuration (only one of each per port) is used for two drive applications. Use the information in the following table before setting drive as Master or Slave.

Master configuration is obtained by setting jumpers A, B, C & D open (no jumper present). Slave configuration is obtained by setting jumpers C-D. When B-D jumper is installed, the drive is configured as cable select. If pin 28 = Low, the drive is "Master", if pin 28 - High, the drive is "Slave".

Figure 1.HDD Jumper Locations

JUMPER

P28

DRIVE

No Jumper

-

Master Drive

C-D Jumper

-

Slave Drive

B-D Jumper

LOW

Master Drive

B-D Jumper

HIGH

Slave Drive

A-B Jumper

-

Prohibit

A-C Jumper

-

Prohibit

2

Page 4
Image 4
Toshiba MK1517GAP (HDD2157) user manual Setup MK1517GAP HDD2157, Master/Slave Settings

MK1517GAP (HDD2157) specifications

The Toshiba MK1517GAP (HDD2157) is a high-performance 2.5-inch internal hard disk drive (HDD) that is designed primarily for laptops, portable devices, and various consumer electronics. This drive is notable for its compact size, lightweight design, and impressive storage capabilities, making it an ideal choice for users seeking an efficient data storage solution.

One of the key features of the MK1517GAP is its substantial storage capacity of 150 GB, which provides ample space for a range of applications, including operating systems, software, and multimedia files. The drive operates at a speed of 5400 RPM (rotations per minute), which strikes a balance between performance and energy efficiency. This rotational speed enables the drive to deliver reasonable data transfer rates, essential for smooth operation in everyday use.

The Toshiba MK1517GAP employs an Advanced Format (AF) technology, which utilizes 4K sector sizes to enhance data integrity and increase storage efficiency. This technology helps to improve the way data is read and written on the drive, allowing for better alignment of data clusters, reduced overhead, and ultimately more efficient utilization of available storage space.

In terms of interface, the MK1517GAP uses a SATA (Serial Advanced Technology Attachment) interface, which has become the standard technology for connecting storage devices. The drive is compatible with SATA I, II, and III, ensuring versatility and ease of integration into different systems, whether older or more modern configurations.

To enhance its durability and reliability, the MK1517GAP is designed with Shock Sensor Technology, which can detect sudden drops or impacts, allowing the drive to respond by protecting critical data. This feature is paramount for portable devices, where physical shocks are more common.

Additionally, the MK1517GAP offers low power consumption and heat generation, making it suitable for battery-operated devices. Its low energy requirements contribute to prolonging battery life in laptops and other mobile devices, allowing users to work longer without needing a recharge.

Overall, the Toshiba MK1517GAP (HDD2157) combines a balance of storage capacity, performance, and advanced features, making it an optimal choice for users in need of reliable, portable, and efficient storage solutions. Whether for everyday computing or as part of a multimedia setup, this HDD remains a pertinent option in the evolving landscape of data storage technology.