Installation Notes

ƒThe drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion.

ƒIn order to prevent short-circuit under any circumstances, a space of 0.5mm or more should be kept under the PCB.

ƒSpace should be kept around the drive to avoid any contact with other parts, which may occur due to shock or vibration.

ƒThe temperature of the top cover and the base must always be kept under 60C to maintain the required reliability.

ƒBe sure not to cover the breathing hole to keep the pressure inside the drive at a certain level

ƒDo not apply any force to the top cover, except the screw areas on top cover. Maximum force to the specified area is 2N.

ƒThe drive contains several parts which may be easily damaged by ESD (Electric Static Discharge). Avoid touching the interface connector pins and the surface of PCB. Be sure to use ESD proof wrist strap when handling drive.

ƒThe four mounting screws should be tightened equally with 0.3N-m (3kgf-cm) torque. The depth should be 3.0mm minimum and 3.5mm maximum.

Placing Hard Drive inside your Computer

•Determine mounting configuration (the drive can be mounted in either a horizontal or vertical orientation)

•Configure drive for system application.

•Configure the adapter board for the specific system application (if required).

•Install adapter board into an unused PC/AT 16 bit slot (if required).

•Install the I/F cable to the system's 44 pin connector port or adapter board. Ensure pin 1 is oriented correctly, (pin 1 on the cable is usually identified by a red or blue strip.)

•Set correct drive type in system CMOS

•Refer to applicable manuals for software installation instructions.

Important Note: Disconnect power from your computer system before beginning installation.

Figure 2.HDD Mounting Holes

3

Page 4 Page 6
Page 5
Image 5
Toshiba MK1517GAP (HDD2157) user manual Installation Notes, Placing Hard Drive inside your Computer
Page 4 Page 6

MK1517GAP (HDD2157) specifications

The Toshiba MK1517GAP (HDD2157) is a high-performance 2.5-inch internal hard disk drive (HDD) that is designed primarily for laptops, portable devices, and various consumer electronics. This drive is notable for its compact size, lightweight design, and impressive storage capabilities, making it an ideal choice for users seeking an efficient data storage solution.

One of the key features of the MK1517GAP is its substantial storage capacity of 150 GB, which provides ample space for a range of applications, including operating systems, software, and multimedia files. The drive operates at a speed of 5400 RPM (rotations per minute), which strikes a balance between performance and energy efficiency. This rotational speed enables the drive to deliver reasonable data transfer rates, essential for smooth operation in everyday use.

The Toshiba MK1517GAP employs an Advanced Format (AF) technology, which utilizes 4K sector sizes to enhance data integrity and increase storage efficiency. This technology helps to improve the way data is read and written on the drive, allowing for better alignment of data clusters, reduced overhead, and ultimately more efficient utilization of available storage space.

In terms of interface, the MK1517GAP uses a SATA (Serial Advanced Technology Attachment) interface, which has become the standard technology for connecting storage devices. The drive is compatible with SATA I, II, and III, ensuring versatility and ease of integration into different systems, whether older or more modern configurations.

To enhance its durability and reliability, the MK1517GAP is designed with Shock Sensor Technology, which can detect sudden drops or impacts, allowing the drive to respond by protecting critical data. This feature is paramount for portable devices, where physical shocks are more common.

Additionally, the MK1517GAP offers low power consumption and heat generation, making it suitable for battery-operated devices. Its low energy requirements contribute to prolonging battery life in laptops and other mobile devices, allowing users to work longer without needing a recharge.

Overall, the Toshiba MK1517GAP (HDD2157) combines a balance of storage capacity, performance, and advanced features, making it an optimal choice for users in need of reliable, portable, and efficient storage solutions. Whether for everyday computing or as part of a multimedia setup, this HDD remains a pertinent option in the evolving landscape of data storage technology.
Top Page Image Contents