15.TROUBLE SHOOTING
Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.
SymptomCause
No power | The car ignition is not on. |
Solution
If the power supply is properly connected to the car accessory terminal, switch the ignition key to “ACC”
| The fuse is blown. | Replace the fuse. | |
|
|
| |
Disc cannot be loaded | Presence of CD disc inside | Remove the disc in the player, then put a | |
or ejected | the player. | new one. | |
|
|
| |
| Inserting the disc in reverse | Insert the compact disc with the label | |
| direction. | facing upward. | |
|
|
| |
| Compact disc is extremely | Clean the disc or try to play a new one. | |
| dirty or defective disc. |
| |
|
|
| |
| Temperature inside the car is | Cool off or until the ambient temperature | |
| too high. | returns to normal. | |
|
|
| |
| Condensation. | Leave the player to off for an hour or so, | |
| then try again. | ||
|
| ||
|
|
| |
No sound | Volume is in minimum. | Adjust volume to a desired level. | |
|
| ||
| Wiring is not properly | Check wiring connection. | |
| connected. |
| |
The operation keys do | The | Press the RESET button. | |
not work | not operating properly due to | Front panel is not properly fixed into its | |
| noise. | place | |
|
|
| |
Sound skips. | The installation angle is | Adjust the installation angle to less than | |
| more than 30 degrees. | 30 degrees. | |
|
|
| |
| The disc is extremely dirt or | Clean the compact disc. Then try to play a | |
| defective disc. | ||
| new one. | ||
|
| ||
The radio does not | The antenna cable is not | Insert the antenna cable firmly. | |
work. | connected. | ||
| |||
The radio station |
|
| |
The signals are too weak. | Select a station manually. | ||
automatic selection | |||
|
| ||
does not work. |
|
| |
|
|
| |
ERROR 1 | Mechanism Error | Press the reset button if the error code | |
does not disappear, consult your nearest | |||
|
| ||
|
| service dealer. | |
|
|
| |
ERROR 2 | Servo Error | Press the reset button if the error code | |
|
| does not disappear, consult your nearest | |
|
| service dealer. |
If at any time in the future you should need to dispose of this product, please noted that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive).
E - 16