4. DETACHABLE CONTROL PANEL (D.C.P.)
Removing The Detachable Control Panel (D.C.P.).
1. Turn the power off
2. Press the D.C.P. release button
3. Remove the D.C.P.
PANEL RELEASE
BUTTON
Attaching the DCP
2
A
B
CAUTION
1.Attach the panel at the right side first, with point B on the main unit touching point A on the D.C.P. (As shown on the digram).
2.Then press the left side of D.C.P. onto the main unit until a “click” sound is heard.
DO NOT insert the D.C.P from the left side. Doing so may damage it.
The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To prevent damage to the D.C.P, always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
| Note: |
| If the D.C.P is dirty, wipe off the dirt with soft, |
| dry cloth only. And use a cotton swab soaked |
| in isopropyl alcohol to clean the socket on the |
Socket | back of the D.C.P. |
|
E - 4