Boss Audio Systems 822UA DIN REAR-MOUNT Method B, Removing The Detachable Control Panel D.C.P

Page 6

DIN REAR-MOUNT (METHOD B)

-For specific factory models only

Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket.

Factory radio

Screw

mounting bracket

 

Hook

Screw

Hook

1.Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side.

2.Screw(must not use more than 6mm length)

3.Factory radio mounting bracket.

4.Dashboard or Console

5.Hook (Remove this part)

Note: the mounting box, outer trim ring, and half-sleeve are not used for method B installation.

Dashboard or console

DETACHABLE CONTROL PANEL (D.C.P.)

Removing The Detachable Control Panel (D.C.P.).

PANEL RELEASE

BUTTON

Attaching the DCP

2

B

A

1.Turn the power off

2.Press the D.C.P. release button

3.Remove the D.C.P.

1.Attach the panel at the right side first, with point B on the main unit touching point A on the D.C.P. (As shown on the digram).

2.Then press the left side of D.C.P. onto the main unit until a click sound is heard.

CAUTION

DO NOT insert the D.C.P from the left side. Doing so may damage it.

The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks.

When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To prevent damage to the D.C.P, always store it in a protective case after detaching it.

The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

REAR CONNECTOR

Note:

If the D.C.P is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the D.C.P.

IMPORTANT

These 2 screws are used to prevent damage to the CD mechanism during transportation Please make sure to remove the 2 screws before installing the unit into the vehicle. DO NOT insert a CD into the unit before removing the 2 screws.

E - 4

Image 6
Contents Page Page Location of Controls Handling Compact Discs Moisture CondensationInstallation DIN FRONT-MOUNT Method a Installation the unitTrim Plate Installation DIN REAR-MOUNT Method B Removing The Detachable Control Panel D.C.PAttaching the DCP Electrical Connection Basic OperationsAudio Operations Radio OperationsCD Operations MMC/SD Card & USB Device Operations Beep ON/OFF Area USA/EURSD/MMC Specification Support MAX 32G SD/MMC Card File Manager FAT12/FAT16/FAT32MP3 Operations Loading CDNavigating Through Directories and Tracks ID3 TAG Filefoldertitlealbum Titleartisttrack TimeUnknown Songname Unknown Artist no Album Title Radio Section FM SpecificationsCD Player AM MWTrouble Shooting Symptom Cause