Boss Audio Systems 822UA manual Electrical Connection, Basic Operations

Page 7

ELECTRICAL CONNECTION

a. Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a converter will be necessary).

b. Make other wiring connections as shown.

c. If your car does not have ISO connector, you can procure it from any car accessory shop.

d. this model include a pair of ISO male connector. Plug them into ISO connector at rear side of player. Connect the wires to corresponding wires of automobile, utilized accessories, and speakers

Notes: INCORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT.

Fuse Replacement:

To replace the fuse, pull out the blown fuse from the socket. Insert a new one with same rating 15A

BASIC OPERATIONS

PANEL RELEASE BUTTON

Press this button to remove the control panel.

POWER BUTTON

Press this button to turn on or off the power.

DISPLAY BUTTON

Press this button briefly, the LCD will display the clock for about 5 seconds, then previous display mode with playing status such as track information(MP3 mode), current radio frequency(Radio mode).

Clock Adjustment

Under clock display mode, long press DISP button until hour digit flashes, Rotate encoder volume knob to adjust. Press SELECT (encoder volume control) to switch to minutes digit and rotate to adjust. Press SELECT again to confirm time setting.

Press this button to view current playing status of different modes.

MODE BUTTON

Press this button to select different mode, sequence as follow:

A)Tuner mode (Radio)

B)CDP/MP3 (only if a CD or MP3 disc is inserted)

C)USB (only if a USB drive is inserted)

D)SD/MMC (only if a SD or MMC card is inserted)

Whenever a USB or SD/MMC is being inserted, unit will automatically switch to USB or SD/MMC mode, does not matter the unit is currently in what mode.

When in USB or SD/MMC mode, if the USB or SD/MMC is being removed, unit will automatically switch to previous mode.

FRONT AUX INPUT

E) AUX-IN

Connect the external signal to the front 3.5mm earphone jack on front panel, then press Mode button to select Aux mode. Press Mode Button again to cancel Aux Mode and return to previous mode.

FRONT CABINET

LEFT TRACK

RIGHT TRACK

GROUND

AUX IN

E - 5

Image 7
Contents Page Page Location of Controls Moisture Condensation Handling Compact DiscsDIN FRONT-MOUNT Method a Installation the unit InstallationTrim Plate Installation Removing The Detachable Control Panel D.C.P DIN REAR-MOUNT Method BAttaching the DCP Basic Operations Electrical ConnectionRadio Operations Audio OperationsCD Operations Beep ON/OFF Area USA/EUR MMC/SD Card & USB Device OperationsSupport MAX 32G SD/MMC Card File Manager FAT12/FAT16/FAT32 SD/MMC SpecificationLoading CD MP3 OperationsNavigating Through Directories and Tracks Filefoldertitlealbum Titleartisttrack Time ID3 TAGUnknown Songname Unknown Artist no Album Title AM MW SpecificationsCD Player Radio Section FMSymptom Cause Trouble Shooting