Whirlpool W10045010 Make Electrical Connection, Electrical Connection Options Chart, Wire

3.Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door aside on a covered work surface.

4.Remove bottom screw on each side of the oven trim.

5.Grasp the bottom end of trim and pull away from oven.

A

A. Remove trim screw and pull out.

6.Slide top end of trim downward to remove trim from oven. Set trim aside.

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together.

1.Disconnect power.

2.Feed the flexible cable conduit from the oven through the opening in the cabinet.

3.Remove junction box cover if it is present.

4.Install a UL listed or CSA approved conduit connector to the junction box.

A

A. UL listed or CSA approved conduit connector

5.Route the flexible cable conduit from the oven to the junction box through a UL listed or CSA approved conduit connector.

6.Tighten screws on conduit connector.

7.See “Electrical Connection Options Chart” to complete installation for your type of electrical connection.

Electrical Connection Options Chart

If your home has:	Go to section:
4-wire	4-wire Cable from Home
	Power Supply

	½"
	(1.3 cm)
3-wire	3-wire Cable from Home
	Power Supply

½"

(1.3 cm)

5