10Using with other equipment
Connecting a personal computer
Use the PC terminals to connect a personal computer.
•The PC input terminal is
(Rear view)
MONITOR SUB
OUT WOOFER
RGB cable
Stereo
mini jack cable
Personal computer
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC on the remote control unit or press INPUT on the plasma television to select “PC”.
When connecting to a personal computer, the correct input signal type is automatically detected. If the personal computer image does not come in clearly, you may need to use Auto Setup menu. See page 36.
Note
• The PC terminals cannot be used for audiovisual equipment.
Computer compatibility chart
Resolution | Frequency | ||
720 x 400 |
|
| 70 Hz |
|
|
| |
640 x 480 | (VGA) | 60 Hz | |
|
|
| |
800 x 600 | (SVGA) | 60 Hz | |
|
|
| |
1280 x 720 |
| 60 Hz | |
|
|
| |
1024 x 768 | (XGA) | 60 Hz | |
|
|
| |
1360 x 768 | 60 Hz | ||
|
| ||
1280 x 1024 (SXGA) | 60 Hz | ||
|
|
|
|
Connecting an amplifier/AV receiver
You can enjoy more powerful sound by connecting an amplifier /AV receiver and subwoofer to the plasma television.
(Rear view)
MONITOR SUB
OUT WOOFER
Stereo audio cable | Audio cable |
AV receiver
Subwoofer
Note
•For details, refer to the operation manual for the audio equipment to be connected.
•If your amplifier/AV receiver has a subwoofer output, it is not necessary to connect the subwoofer output on the plasma television.
•Audio signals corresponding to the currently displayed images are always output to the MONITOR OUT and SUBWOOFER terminals.
Avoiding unwanted feedback
You can prevent unwanted feedback from adversely affecting the quality of images. Specify the output terminal whose output is to be inhibited.
1Press HOME MENU.
2Select “Option“ (/ then ENTER).
3Select “Monitor Out“ (/ then ENTER).
4Select the desired parameter (/ then ENTER).
Monitor Out
Always Output
INPUT 1 Prohibit
INPUT 2 Prohibit
INPUT 3 Prohibit
INPUT 4 Prohibit
INPUT 5 Prohibit
INPUT 6 Prohibit
44
En
