Preparation 05

15
En
English

Chapter 5

Preparation

Installing the plasma television

Location
• Avoid direct sunlight. Maintain adequate ventilation.
Caution
• If you do not leave suf ficient space above the plasma television,
it will not receive enough ventilation and will not operate
properly.
• Pioneer will not be responsible for accident or damage caused
by inadequate installation or stabilization, erroneous
operation, remodeling or natural disasters.
Note
• Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the unit.
• Be sure to install the plasma television in a flat, stable location.

Using the optional Pioneer stand

For details on installation, refer to the instruction manual supplied
with the stand.

Using the optional Pioneer speakers (for PDP-508XG

only)

For details on installation, refer to the instruction manual supplied
with the speaker.

Moving the plasma television

When installing on a rack, etc., hold the plasma television as
shown on the right. Because the plasma television is heavy, be
sure to have someone help you when moving it.
(For PDP-508XG)
Under speaker
Side speaker
(For PDP-428XG)
Note
• Do not use the speaker to support the weight of the plasma
television.
• When the plasma television has under-mounted speakers,
always remove the speakers before moving the plasma
television. Do not hold the plasma television by the speaker
mounting fittings.
Over 50 cm
Over
10 cm