11Using the HDMI Control
Connecting a DVD recorder
(Rear view)
HDMI compliant cable (HDMI cable having the HDMI mark)
DVD recorder
Note
•Maximum number of devices that can be connected and controlled using the remote control unit of the plasma television is as follows: recorder x 2, player x 2, AV system x 1.
•When connecting an AV system, be sure to place and connect it between the plasma television and recorder or player.
•Do not connect an AV system that does not support the HDMI Control functions between the plasma television and a recorder/player, otherwise the HDMI Control functions may not operate properly.
•When connecting an AV system that does not support the HDMI Control functions and a player/recorder that supports the HDMI Control functions to the plasma television, connect the AV system to the MONITOR OUT terminal on the plasma television using a stereo audio cable, and the recorder/player to the HDMI terminal using an HDMI compliant cable (see the illustration).
•HDMI Control may not operate properly if you do not use an HDMI cable that supports the HDMI 1.3 Specification.
(Rear view)
MONITOR SUB
OUT WOOFER
Stereo | HDMI compliant cable |
audio cable | (HDMI cable having the |
| HDMI mark) |
AV amp | DVD recorder |
•After making connections, enter the setting in “Input Setting” for “HDMI Control Setting”. Be sure that the setting is entered in each HDMI input terminal to which the device is connected.
•Settings in the connected device(s) are also required to use the HDMI Control functions. For details, see the operation manual that came with the connected device(s).
•When a recorder is connected, its power is automatically switched on as the plasma television is turned On to help make the recording smoother.
•For more information on the devices that support the HDMI Control functions, check the Pioneer Web site (see back cover).
58
En
