Before You Start Tuner, Maintenance | Boss Audio Systems BV9980

01Before You Start

Tuner

Maintenance

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs,

it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer.

!Warning

Never use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit.

Replacing the Battery

When the range of the operation of the card remote control becomes short or no functions while operating. Replace the lithium battery with a new button cell (CR2025). Make sure the battery polarity before replace.

Gently pull out the Battery Holder while pressing the Stopper.

Insert the Battery Holder into the Remote

Control.

Precautions on Using Lithium Battery

Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately.

Cleaning the battery with a dry cloth, to ensure its perfect connected.

Make sure the proper polarity when loading with the battery.

To prevent short circuit, do not use metal tweezer to clip the battery.

!Warning!

Improper handle with the battery may

lead to explosion.

It cannot be charged , disassembled or

thrown into a fire.

Listening to the radio

		2		3
1	FM1	CH:1		87.50MHz
					4
	87.50M			87.50M
5	90.00M			108.00M
	98.00M			106.00M
	6		8	7	9

1Band Indicator

Shows which band the radio is tuned to.

2Preset Number Indicator

Shows what preset has been selected.

3Frequency Indicator

Shows which frequency the tuner is tuned.

4SEEK+/SEEK-

Briefly press to tune by the presettable range, hold and press to tune automatically.

5The 6 stations of the current band.

Briefly press to select station, hold and press to save the current station to one of the 6 stations.

6BAND

To select the bands.

7AMS

Briefly press to scan the current station, hold and press to tune automatically.

8MENU

Press this button to set the main menu.

9SRC

Band Selector

During radio status, repeatedly press

3BAND button to select bands in the following order:

FM1 FM2 FM3

AM2AM1

Note:

* Press BAND on the head unit or 6 in the monitor performs the same function.

Manual/Automatic Tuning

Manual Tuning: Press( or ) button on the remote control continuously to select a station downward or upward respectively.

Automatic Tuning: Press and hold( or ) button for more than 3 seconds, the ra- dio automatically searches a station down-

ward or upward respectively and plays when it finds a station.

Note:

*Press / on the head unit or in the monitor performs the same function.

DX/LOC Selector

During radio status, press 5 LOC button to select strong or weak station reception.

LOC ON appears on the display and only local station is available. LOC OFF appears on the display both distance and local stations can be received.

Note:

*The function is only valid on remote control.

*The function is invalid in AM tuning.

Selecting the Stored Station

Press this button to select the signal source.

During radio status, press 27 button to select the stored station upward, press to

Put the button-type battery with mark(+) upward into the Battery Holder.

select the stored station downward.

Note:

*The function is only valid on remote control.