09Tuner
Before You Start | 01 |
MO/ST Selector
Press 6 ST button on the remote control to select MONO mode or STEREO mode.
Stereo reception is charged when STEREO appears. It is switched to mono mode when
MONO appears. ST OFF appears on the display to switch to MONO compulsively.
Note:
*It is only valid on remote control.
*Switch to MONO compulsively to improve the listening quality when week signal.
*It is only valid in FM tuning.
Scanning/Memorizing Stations Automatically
Number Buttons
During radio status, press Number
Buttons to receive the stored stations.
During radio status, Number Buttons
(from 1 to 6) 23 can help you store your favorite station. You can follow the steps as below:
1 When receiving a station,press and hold |
any one of the Number Buttons |
(from 1 to 6) until the number app- |
ears on the LCD, which indicates that |
station is already stored in the corres- |
ponding number button. |
2 Press 4 AMS button to receive stations |
automatically, and store them in 1 to 6 |
PRECAUTIONS
This unit can play the following discs only:
Type of disc | Label on the disc | Recorded material | Size of disc |
DVD |
| Sound and moving |
|
| pictures |
| |
|
|
| |
VCD |
| Sound and moving |
|
| pictures |
| |
|
|
| |
CD |
| Sound only |
|
MP3 |
| Sound only |
|
| Sound and moving |
| |
| pictures |
| |
|
|
|
NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.
During radio status, you can press 4 AMS button on the remote control to scan each stored station 5 seconds respectively which stored in 23 Number Buttons (from 1 to 6). You can press the corresponding Number Buttons or AMS button when your desired station is charged. And it starts playing that station.
When press and hold 4 AMS button for more than 2 seconds, it will activate auto- matically memory storing function. The radio automatically selects a station and has it stored in any one of the 23 Number
number respectively. |
3 Press and hold another number button |
more than 2 seconds when listening in |
a station in one number button s, the |
button station will be stored in that |
number button. |
Note:
* Press 5 in the monitor performs the same function.
On Screen Display
Do not attempt to modify the unit, modifying the unit may cause an accident.
Stop the vehicle before carrying out any operation that could interfere with your driving.
Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle is between +60 C and
Do not use your CDs with paste residue or ink attached.
Do not use CDs with labels or stickers attached, which may leave a sticky residue while beginning to peel off.
(Shown as the picture)
Buttons (from1 to 6).
Note:
*The unit can be stored up to 6 stations for each band.
*Press in the monitor performs the same function.
During radio mode, press 8 OSD to
display the edition information and the
LCD display the current time.
Note:
*It is only valid on remote control.
To enjoy optimum sound and images while playing, handle the discs as follows:
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
Clean the discs with an optional clean- ing cloth. Wipe each disc from the center out. (Shown as the picture)
40
Besides playing the discs above, the unit also can be connected to other connector. Please refer to the details on page 19 before you playing them.
5