Boss Audio Systems 765DBI manual Bluetooth Hand Free Operation, User Guide For Bluetooth Operation

17. BLUETOOTH HAND FREE OPERATION

User Guide For Bluetooth Operation

1.When user use our Bluetooth HEAD UNIT, please make sure the mobile phone you use must / does support Bluetooth functions (Headset or Handsfree profiles or both)

2.Before you start to use our Bluetooth HEAD UNIT, please make sure complete pairing with your mobile phone first. Please refer to the user manual, section “PAIRING” for detail “PAIRING” instruction. To ensure the best reception for Pairing or Re-connection, please make sure the Phone Battery is fully charged when making the Pairing or Re-connection.

3.Please always try pairing the Mobile Phone with Head unit after a few minutes of the Mobile Phone was Switched On to ensure the best pairing result.

4.“BT60” is this unit device model number which is displayed on the mobile phone.

5.To achieve the best performance, please always keep the Mobile Phone within 3 meters of the Head unit.

6.Please always keep a clear path between the Mobile Phone & the Head unit.

7.Never put any metal object or any obstacle between the path of the Mobile Phone & the Head unit.

8.Some brand of Mobile Phone like Sony Ericsson may have "Power Saving Mode" selection when Bluetooth mode is switched on. PLEASE DO NOT Switches ON Power saving Mode when operating with this Head Unit, as some abnormal communal behavior will happen occasionally if Power Saving Mode is switched on.

9.Before user make Outgoing call or Incoming call, make sure the mobile phone's “Bluetooth function” was switched “ON”.

10.To ensure the best conversation quality / performance, please always keep talking within 1 meter of the Head Unit.

11.If user want to Dis-connect the Head unit with the Mobile Phone, please switch "OFF" Blue Tooth connectivity on the Mobile Phone,or go to the system menu, "dis-connect" to disconnect the bluetooth connectivity manually. ( please refer to the user manual, section "dis-connection of the bluetooth system for details instruction. )

12.Some Mobile Phones can support “IN BAND RING TONE”, such as Nokia. In such case, the Incoming Ringing Tone will be same as the original Ring-tone of the Mobile Phone. But some Mobile Phones like Sony Ericsson do not support this feature. The Ring-tone will be using the standard Ring-tone of the Head unit.

13.When in telephone mode, during talking, it is highly recommended to set the volume to below “30” in order to achieve the best sound quality. As if the volume is too high, it may create unwanted echo inside the car, and this unwanted echo may feedback into the microphone.

14.If the Bluetooth related operation is not performing normally, like cannot make pairing, cannot making an outgoing call, User can try to make a SOFT-RESET of the Bluetooth module by removing / detaching the panel from the main unit and waiting for about 1 min. Then re-attach the panel to the unit & retry the Bluetooth operation again. Or user can RESET the whole unit by pressing the RESET button behind the panel.

By pressing the RESET button all the stored memory will resume to factory default

26