CD MODE
Scanning tracks (SCAN)
You can briefly listen in to all the tracks on a CD.
➮Hold down the OK button ; for more than two seconds. The next track starts to play.
Note:
●The scanning time is adjustable. Read about setting the scanning time in the section “Setting the scanning time” in the chapter “Ra- dio mode”.
Stopping SCAN and continuing playback
➮Press the OK button ;to end scanning.
The current track will then continue to play.
Repeating a track (REPEAT)
➮If you would like to repeat a track, press button 4 RPT >.
“REPEAT TRCK” appears briefly on the display, the RPT symbol lights up. The track is then repeated until RPT is de- activated.
Stopping REPEAT
➮If you would like to end repeat, press the button 4 RPT >once again.
“REPEAT OFF” appears briefly on the display, the RPT symbol goes out. Nor- mal playback is resumed.
Interrupting play (PAUSE)
➮Press the button 3 
>. “PAUSE” appears on the display.
Ending Pause
➮Press the button 3 
>during the pause.
Play then resumes.
Changing the display
➮To alter the display between track
number and time or track number
and playing time, press the 
/ DIS 7button once or several times for more than two seconds until the desired elements appear on the display.
Traffic announcements in CD mode
➮If you want to receive traffic an-
nouncements whilst listening to a CD, press the TRAF ? button.
Traffic announcement priority is active when the
Removing a CD
➮Press the 
button 9.
The flip/release panel opens to the front and the CD is ejected.
➮Carefully remove the CD and close the flip/release panel.
42