DSC menu (Direct Software Control)
Blaupunkt’s exclusive Direct Software Control Menu has many unique features that allow you to customize the unit to your needs and preferences.
Using the DSC menu:
1.Press MENU for 2 seconds to access the DSC menu mode.
2.Press the 
/ 
controls to scroll through the DSC menu.
3.Use 
or 
to change menu settings.
4.After 8 seconds or by pressing the MENU button the unit exits from the DSC menu. All changes are stored when leaving the DSC menu manually or automatically.
Turn-on message activation (“MSG ON”/“MSG OFF”)
Press 
or 
to turn the message on or off.
Turn-on message programming (“MSG ENTR”)
The unit can scroll a
1.Press the 
button. Eight hyphens appear with the first one blinking.
2.Press 
/ 
to select the desired characters. If you want to put a blank space in name, select “_”.
3.Press 
to locate the next character.
4.After the eighth character (the farthest right character) is completed, the first
characters, pressing 
will access the first group again.
5.Press AUDIO to store the
Clock adjustment (“CLOCKSET”)
Pressing 
or 
shows the blinking time. Subsequent press of 
advances the hour; 
advances the minutes. Press AUDIO to adjust the minute to :00. The unit begins keeping the time when 
or 
is pressed or when the DSC menu mode ends.
Tuner timer on/off (“TMR ON”/“TMR OFF”)
The tuner timer allows the unit to go to a certain frequency at a certain time – from any audio source. When the ignition is on and the unit off, the timer even turns the unit on and goes to the
specified frequency. Press 
or 
to turn the tuner timer on or off.
Tuner timer set mode (“TMR SET”)
1.Before entering the DSC menu, tune in the radio frequency to be activated by the timer.
2.Access the DSC menu mode and scroll to “TMR SET” by pressing or 
.
3.Press 
or 
to enter the timer adjustment mode.
4.Select the time at which the unit should switch to this station by pressing the 
button to
adjust the hours and the 
button to adjust the minutes. Press AUDIO to adjust the minutes to :00.
5.To store the station and the time, press MENU.
Radio Monitor (“RM ON” / “RM OFF”)
Allows the radio to play during tape winding. If this feature has been activated, the RM icon
appears when a tape is in use. Press 
or 
to turn Radio Monitor on or off.
Blank skip time (“BSKPTIME”)
When the unit reaches a blank section of tape, it can automatically
recorded section. Use 
and 
to chose a minimum amount of blank time before blank skip begins from between 4 to 20 seconds.
Recommendation: Classical music listeners may want to specify a longer blank, so that the unit doesn’t mistake soft passages for blank spots.
DEUTSCH
ENGLISH
FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
33