Blank Skip Bskp on / Bskp OFF, Scan times

DSC menu (Direct Software Control)

Blank Skip (“BSKP ON” / “BSKP OFF”)

Press or to turn Blank Skip on or off.

Scan times

You can set different scan times for radio (“RD SCNTM”), cassette (“TP SCNTM”), and changer

(“CD SCNTM”) between 1 and 16 seconds. Press or

to adjust the scan time.

Confirmation beep on/off (“BTTNBEEP”)

To activate or defeat the beep for all button presses, press or . Button presses requiring more than 1/2 second always have a confirmation beep.

Adjustable mute level (“MUTE LVL”)

The unit’s mute level can be adjusted to any volume level. This mute level also applies to cellular mute. Once “MUTE LVL” appears, the actual mute level is heard. Adjust the mute level

volume by pressing or . Do not use the + or – button to set the mute level.

Note: If mute is activated when the unit volume level is lower than the mute level, the unit’s volume level is maintained, even though “MUTE” appears.

Maximum turn-on volume level (“MAXONVOL”)

This function allows you to set the maximum volume that is heard when unit is turned on. Once “MAXONVOL” appears, the actual turn-on volume level is heard. Adjust the turn-on volume by

using / . Do not use the + or – button.

Note: If the unit is turned off while the volume is louder than the adjusted turn-on volume, the turn-on volume will be at the level it was when the unit was turned off.

Loudness levels

You can choose between two loudness settings for each audio source: “LOUD AUX” (for external unit), “LOUD CD”, (for CD changer), “LOUDTAPE” (for cassette),“LOUD AM” and “LOUD FM” (for radio). To set the loudness level for each source, use and .

Radio station naming (“STN NAME”)

This function is available only while the radio is the active source. You can enter a name of

8 characters for each radio station. Up to 30 stations can be named. If you try to enter more than 30 names, “**FULL**” appears. You can then enter new names after erasing some of the existing names.

To store station names:

1.Press MENU for more than 2 seconds to access the DSC menu mode.

2.Scroll to the radio station naming feature by pressing / .

3.Access the radio station naming mode by pressing or .

4.Tune to the desired station by pressing AM or FM, a preset button or / . If the station was previously named, the name appears in the display.

5.Press or to access the station name edit mode.

6.Press / to select characters. Select “_” for a blank space.

7.Press to select the next character position.

8.Press AUDIO to store the name. “STORING” blinks twice in the display before the unit returns to the station access mode.

9.To name another station, repeat the steps 4-8.

10.Press MENU to exit from the DSC menu.

Erasing one radio station name

Enter the station access mode in the DSC menu (see “Radio station naming”, above). Choose the station with the name to be deleted. Once the name appears in the display, press AUDIO for 2 seconds. A beep sounds. Now release the button to delete this name. “NAME” and “DELETED” blink alternately. PressMENU to exit from the DSC menu.