Adjusting the Volume

Adjusting the volume

The volume can be adjusted in steps from 0 (off) to 66 (maximum).

➮To increase the volume, turn the volume control 2to the right.

➮To decrease the volume, turn the volume control 2to the left.

Setting the power-on volume

You can set the unit’s default power-on volume.

➮Press the MENU button 8.

➮Keep pressing the or button :until “ON VOLUME” appears in the display.

➮Set the power-on volume using the and buttons :.

If you change the setting to “0”, the pow- er-on volume will be the same as the volume level that was set before the unit was last switched off.

Note:

●To protect your hearing, the power- on volume is limited to a value of “38”. If the volume level was higher when the unit was switched off, the volume will be reset to “38” when the unit is switched on again.

When you have finished making your changes,

➮press the MENU button 8or OK ;twice.

Instantaneous volume reduction

(mute)		ENGLISH

This feature allows you to instanta-
neously reduce (mute) the volume to a
level preset by you.
		FRANÇAIS
➮	Briefly press button 3.

“MUTE” appears in the display.
Setting the mute level

		ESPAÑOL
You can set the unit’s mute volume lev-

el.
➮ Press the MENU button 8.
➮ Keep pressing the or button		PORTUGUÊS
	:until “MUTE LEVEL” appears in

the display.

➮ Set the mute level using the and buttons :.

When you have finished making your changes,

➮press the MENU button 8or OK ;twice.

Telephone audio / navigation audio

If your car radio is connected to a mo- bile telephone or a navigation system, the unit’s volume will be muted as soon as you “pick up” the telephone or as soon as a navigation announcement is made. The caller or voice output will then be heard over the car radio loud- speakers. In order for this to work, the mobile telephone or navigation system must be connected to the car radio in the manner described in the installation instructions.