RADIO MODE
Storing stations automatically (Travelstore)
You can automatically store the six sta- tions with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range.
Note:
●Stations that were previously stored in this memory are deleted in the process.
➮Briefly press the TS button ?.
The station storing procedure begins.
Listening to preset stations
➮Select the memory level on which the station was stored.
➮Press the preset station button
Scanning receivable stations (SCAN)
You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu.
Starting SCAN
➮Keep the OK button ;pressed until the scan process starts.
“SCAN” appears briefly in the display followed by the current frequency (which flashes).
Stopping SCAN and continuing listening to a station
➮Press the OK button ;.
Scanning is stopped and the station that was tuned into last will remain active.
Setting the scantime
➮Press the MENU button 8.
➮Keep pressing the 
or 
button :until “SCANTIME” appears in the display.
➮Set the required scantime using the 
and 
buttons :.
When you have finished making your changes,
➮press the MENU button 8or OK ;twice.
Note:
●The set scantime also applies to scanning in CD and CD changer mode.
Tuner configuration
This unit is equipped with a multiband tuner. The tuner can be configured to suit the requirements that are specific to various countries. The countries/re- gions available are: America, Europe, Asia and Thailand. The tuner will only function optimally if it is configured for the country/region in which the unit is being operated.
Configuring the tuner
➮Press the MENU button 8.
➮Keep pressing the 
or 
button :until “FM TUNER” appears in the display.
12