Blaupunkt TRUE Selecting tracks, Fast searching, Interrupting playback, Scanning all tracks

Page 12

CD/MP3/WMA/iPod mode

If the USB data carrier is initially selected as audio source, the data are read first.

Notes:

•If the connected USB data carrier cannot be seen, "USB ERROR" is briefly displayed.

•The time required for reading in the data depends on the design and size of the USB data carrier.

Removing a USB data carrier

￿Switch off the car sound system so that the data carrier will be correctly unregistered.

￿Disconnect the USB data carrier.

￿After you pulled off the data carrier from the

USB port at the front of the device, close the protective cap of the USB port :.

Inserting/removing the memory card

Inserting the memory card

￿Detach the control panel.

￿Insert the memory card with its labelled side up and its contacts first into the card slot B until it clicks into place.

￿Attach the control panel.

After switch-on, the device automatically selects the inserted memory card as audio source. The data of the memory card are be- ing read. Afterwards, the playback starts in MP3 mode.

Notes:

•If the inserted memory card cannot be played, "SD ERROR" is briefly displayed.

•The time required for reading the card depends on the design and size of the memory card.

Removing the memory card

￿Detach the control panel.

￿Push on the memory card until it disengages.

￿Pull the memory card out of the card slot B.

￿Attach the control panel.

Selecting tracks

￿Turn rotary control 7 one notch counter- clockwise or clockwise to change to the pre- vious/next track.

Notes:

•If you turn rotary control 7 several notches counter-clockwise or clockwise, you jump forward or reverse by the corre- sponding number of tracks.

•If the current track plays longer than 3 seconds and you turn rotary control 7by one notch counter-clockwise or clockwise, the tracks starts playing again.

Fast searching

￿Press the rotary control 7once.

The display briefly shows "CUE/REVIEW".

￿Turn the rotary control 7 until the desired position has been reached.

Note:

If you press the rotary control 7 twice, the

display briefly shows "TRACK SELECT". By turning the rotary control 7, you select a different track.

Interrupting playback

￿Press the 3 button > to interrupt the playback ("PAUSE") or to continue it.

Scanning all tracks

The scan function scans all available tracks.

￿Press the rotary control 7for approx. 2 sec- onds to start the scan, or briefly to continue playing the currently scanned track.

During the scan, the display alternately dis- plays "SCAN" and the current track number or file name.

Note:

The scan time can be adjusted (see the chap- ter "User settings", section "Making settings in the "VARIOUS" menu", menu item "SCAN TIME").

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Car Radio CD USB SD Bluetooth Volume control CD tray Display Rotary control Microphone Hamburg 420 BT only USB port Front AUX-IN socketControls Bluetooth Optional equipmentSearching by track names Additional functionsSafety notes Symbols usedRoad safety General safety notesCleaning notes Disposal notesScope of delivery Setting the reception area Switching on/offVolume Radio mode Switching demo mode on/offTraffic information Display brightnessChanging to radio mode or selecting a memory bank Tuning into a stationStoring stations or calling stored stations Scanning stationsOn , only traffic information stations are stored Selecting a programme typeSearching for stations CD/MP3/WMA/iPod mode Configuring the displayBasic information AbcdefChanging to CD/MP3/WMA/iPod mode Connecting/removing a USB data carrierInserting/ejecting a CD Selecting tracks Fast searchingInterrupting playback Scanning all tracksPlaying tracks in random order Repeatedly playing individual tracks or directoriesBrowse mode Browse mode in MP3/WMA modeBrowse mode in iPod mode Bluetooth Hamburg 420 BT only Bluetooth menuSearching by track names not in iPod mode CharactersPairing and connecting a device Calling the Bluetooth menuPairing and connecting a cell phone Telephone functions Option is selected, and press the rotary controlDevice with a short press of the On/Off button Answering/rejecting an incoming phone callMaking a call Calling an entry in the phone bookMaking a call with voice dial Storing a phone number in the car sound system You can now enter a name with up to 15 char- actersPress the button =to call the number To call any number Press the button =Bluetooth streaming mode Phone book functionsAdditional functions Bluetooth menu Bluetooth menu, select the DOWN- Load P-BOOK menu itemChanging the Bluetooth PIN Press the rotary control 7againSetting the button function for speed dial Managing paired devicesIf no device is paired, Empty List is briefly displayed Select the Delete ALL menu itemSound settings Increased risk of injury from connectorExternal audio sources Front AUX-IN socketBass TrebleBalance FaderSetting the 3-band equaliser AMP DelayEqualizer EQ TrebleUser settings Calling the user menu and selecting a menuEQ Bass EQ X-BASSMaking settings in the Tuner menu Band SelectionRegional SensitivityMaking settings in the Display menu Making settings in the Volume menu On VolumeLanguage Handsfree VOLMaking settings in the Various menu Factory settings AUX EditScan Time VersionTechnical data Warranty ServiceUseful information Safety instructions Installation instructionsDo not connect the vehicle’s plug connec- tors to the radio Installation kits Removal Illumination +12V Sub Out GND Sub Out Radio Mute OhmSupported iPod/ iPhone devices Please keep the filled-in radio pass in a safe place Type Serial no
Top Page Image Contents