User settings
Making settings in the "CLOCK" menu
PERM CLOCK
Switch the permanent display of the time on or off. Settings: ON, OFF.
Press the rotary control 7 to change the setting.
Turn the rotary control 7 to change be- tween the settings.
Press the rotary control 7 to confirm the setting.
If the permanent display of the time is switched on, the time is shown on the display. The display of the respective audio source is shown only after pressing a button. Approximately 15 seconds af- ter the button is pressed last, the time is displayed again.
HOUR MODE
Selecting the 12 or
Press the rotary control 7 to change the setting.
Turn the rotary control 7 to change be- tween the settings.
Press the rotary control 7 to confirm the setting.
SET
Setting the time.
Press the rotary control 7 to change the setting.
Turn the rotary control 7 clockwise to set the hours.
Turn the rotary control
Press the rotary control 7 to confirm the time set.
Note:
When you set the time in
Making settings in the "VARIOUS" menu
DEMO MODE
Switching the demo mode on or off. Settings: ON, OFF.
Press the rotary control 7 to change the setting.
Turn the rotary control 7 to change be- tween the settings.
Press the rotary control 7 to confirm the setting.
In demo mode, the features of the radio are shown as scrolling text on the display.
MIX AUX
Switching the combined playback of the AUX source with another audio source on or off. Settings: ON, OFF.
Press the rotary control 7 to change the setting.
Turn the rotary control 7 to change be- tween the settings.
Press the rotary control 7 to confirm the setting.
With the AUX MIX ON setting, an audio source connected to the front
AUX MIX GAIN (AUX MIX Level)
Adjusting the level of the AUX source with com- bined playback of the AUX source and another audio source (AUX MIX ON). Settings:
Press the rotary control 7 to change the setting.
Turn the rotary control 7 to set the level adjustment.
Press the rotary control 7 to confirm the setting.
This setting allows raising or lowering the level of the AUX source to adjust it to the level of the other active audio source.
30