Blaupunkt CD52 Radio Mode Traffic Information, Traffic information, Setting the display

RADIO MODE TRAFFIC INFORMATION

Note:

If you tune into an already stored sta- tion using a different means (e.g. using SCAN or by searching), the “scrolling texts”will be displayed.

Setting the display

In radio mode you can choose between the continuous display of the time or the continuous display of the station name/ frequency.

➮Hold down the / DIS button 7 until the desired feature appears on the display.

Traffic information

Your car radio is equipped with an RDS- EON reception system. EON stands for Enhanced Other Network.

When a traffic announcement (TA) is broadcast, your unit will automatically switch, within a broadcasting network, from a station which does not transmit traffic information to one that does.

The unit reverts to the programme pre- viously listened to when the traffic an- nouncement is over.

Switching traffic information priority on/off

➮Hold down the TIM button @ for more than two seconds.

Priority for traffic announcements is ac- tivated when the traffic-jam symbol lights up on the display.

Note:

You will hear a warning tone,

●if you leave the reception area of a traffic information station to which you are currently tuned in;

●if you leave the reception area of a traffic information station when you are listening to a CD and the sub- sequent automatic search cannot locate a new traffic information sta- tion;

●if you retune the radio from a traffic information station to one that does not broadcast traffic information.

Either deactivate the priority for traffic information or switch to a station which broadcasts traffic information.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS DANSK

45