Tuning into a station Storing station presets

RADIO MODE

Tuning into a station

Storing station presets

There are various ways of tuning to a station.

Automatic seek tuning

➮Press the or button 8.

The unit tunes to the next receivable station.

Setting the sensitivity of station seek tuning

You can choose whether to tune only to strong reception stations or to also tune to those with a weak reception.

➮Press the MENU button 8.

➮Keep pressing the or button

8 until “SENS HI” or “SENS LO” appears in the display

“SENS HI” means that the tuner is set high to sensitivity. “SENS LO” means it is set to the low sensitivity setting. If “SENS LO” is selected, “LOC” lights up in the display.

➮Set the required sensitivity using the and buttons 8.

When you have finished making your changes,

➮press the MENU button 8.

Tuning into stations manually

You can also tune into stations manu- ally.

➮Press the or button 8.

Storing stations manually

➮Select the required memory bank (FM1, FM2 or FMT) or the AM (MW/LW) waveband.

➮Tune into the station.

➮Press one of the station buttons

1-6< for longer than one second to store the station in that preset memory.

Storing stations automatically (Travelstore)

You can automatically store the six sta- tions with the strongest reception in the region. The stations are stored in the FMT or AM (MW/LW) memory depend- ing on the selected frequency band.

Note:

●Any stations that were previously stored on this memory bank are deleted in the process.

➮Press and hold the BAND/TS button = until seek tuning begins.

The station storing procedure begins. Once the procedure finishes, all the stored stations are played briefly.

Listening to station presets

➮Select the memory bank on which the station was stored.

➮Press the preset station button 1-6< of the station you want to listen to.