RADIO MODE
The memory banks are accessed in the following order: FM1, FM2, FM3 and FMT.
Tuning into a station
There are various ways of tuning into a station.
Automatic seek tuning
➮Move the joystick 7 down or up.
The unit tunes into the next receivable station.
Tuning into stations manually
You can also tune into stations manual- ly.
➮Move the joystick 7 left or right.
Note:
You can only tune into stations manual- ly if the RDS function is deactivated.
Browsing through broadcasting networks (only FM)
If a radio station provides several pro- grammes, you have the option of brows- ing through its “broadcasting network”.
➮Move the joystick 7 left or right.
Note:
The RDS function must be activated before you can use this feature.
When using this feature, you will only be able to switch to stations that you have received once already.
Setting the sensitivity of station seek tuning
You can choose whether to only tune into stations with a strong reception or to also tune into those with a weak re- ception.
➮press the TUNER button < in ra- dio mode.
The radio functions menu appears in the display.
➮Press the NEXT button 3.
➮Press the softkey 4 assigned to the “SENS” display item.
The display shows the currently set sen- sitivity level. “SENS 6” is the highest sensitivity setting and means the tuner can receive distant stations. “SENS 1” is the lowest setting.
➮Move the joystick 7 up/right or down/left to adjust the sensitivity.
➮Press the joystick OK 7 or the MENU button 8 to close the menu.
The settings are saved.
Storing stations
Storing stations manually
➮Select the required FM memory bank, i.e. FM1, FM2, FM3, FMT, or one of the MW or LW wavebands.
➮Tune into the required station as described in the section entitled “Tuning into a station”.
➮Press one of the six softkeys for longer than two seconds to store the station to that softkey.
74