RADIO MODE
Activating PTY
To use the PTY function,
➮press the TUNER button < in ra- dio mode.
The radio functions menu appears in the display.
➮Press the softkey 4 assigned to the “PTY” display item.
If PTY is activated, the display shows the current programme type. PTY ap- pears in the display. The programme types are displayed alongside the softkeys 4.
Cancelling PTY
To cancel the PTY function,
➮Whilst the programme types are
being displayed, press the softkey 4 assigned to the “OFF” display item.
Selecting a programme type and starting seek tuning
The PTY menu is made up of several pages on which the known programme types are displayed. To browse through the PTY menu’s pages,
➮keep pressing the NEXT button 3 until the required programme type appears alongside one of the softkeys.
➮Press the softkey 4 assigned to the required programme type.
➮Move the joystick 7 up/right or down/left to start seek tuning.
The next receivable station correspond- ing to your selected programme type will then be tuned into.
If no station is found that corresponds to the selected programme type, you will hear a beep sound and “NO PTY” ap- pears briefly in the display. The radio will then retune to the station that was received last.
Note:
If you want to switch back to the pro- gramme types display,
➮briefly move the joystick 7 in any direction.
Optimising radio reception
Treble reduction feature during interference (HiCut)
The HiCut function improves the sound during poor radio reception. If interfer- ence occurs, the treble is automatically reduced thus reducing the interference level.
Setting HiCut
➮Press the TUNER button < in ra- dio mode.
The first page of the radio functions menu is displayed.
➮Press the NEXT button 3.
➮Press the softkey 4 assigned to the “HCUT” display item.
➮Move the joystick 7 up/right or down/left to set the HiCut.
➮Press the joystick OK 7 or the MENU button 8 to close the menu.
The settings are saved.
76