THEFT PROTECTION | SWITCHING ON/OFF |
➮First, pull the control panel straight off the unit and then out towards the left.
●The unit switches off after the con- trol panel is removed.
●All the current settings are saved.
●Any cassette already inserted in the unit remains there.
Attaching the control panel
➮Slide the control panel from left to right into the unit's guide.
➮Press the
Note:
●When attaching the control panel, make sure you do not press the display.
If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i.e. radio, cassette, CD changer/Compact Drive MP3 or AUX) when the panel is replaced.
Switching on/off
There are various ways of switching the unit on/off:
Switching on/off using the vehicle ignition
If the unit is correctly connected to the vehicle's ignition and it was not switched off using button 2, it will switch on/off simultaneously with the ignition.
You can also switch the unit on even if the ignition is off:
➮To do so, press button 2.
Note:
●To protect the vehicle battery, the unit will switch off automatically af- ter one hour if the ignition is off.
Switching on/off using the removable control panel
➮Remove the control panel. The unit switches off.
➮Attach the control panel again.
The unit switches on. The settings (ra- dio, cassette, CD changer/Compact Drive MP3 or AUX) that were set be- fore the unit was switched off will be reactivated.
Switching on/off using button 2
➮To switch the unit on, press button
2.
➮To switch the unit off, press button 2for longer than two seconds.
The unit switches off.
30