Fast tape winding, Pausing playback Pause

“CAS SCAN” appears in the display. All the tracks on the cassette are briefly played in ascending order.

➮To stop scanning, press the OK button ; again.

The current track will then continue to be played.

Note:

●You can set the scanning time.

For further details, read the section on „Setting the scantime“ in the chapter entitled “Radio mode”.

●In order for the S-CPS, RPT and SCAN functions to work properly, there must be a pause of at least three seconds between each track on the cassette.

To switch between the playback direc- tion and clock displays, press the (DIS) button 7 once or several times.

Fast tape winding

Fast forward

➮Press the button :. “FORWARD” appears in the display.

Fast rewind

➮Press the button :. “REWIND” appears in the display.

Stopping tape winding

➮Press one of the buttons : or the OK button ;.

Cassette playback will then be contin- ued.

Note:

Whilst the tape is fast winding, you can	ENGLISH
Whilst the tape is fast winding, you can
listen to the radio station that was tuned
into last. To use this feature, you must
first activate “radiomonitor”.

➮To pause cassette playback, press button 3 >.

Playback is paused and “CAS PAUSE”

appears in the display.		ESPAÑOL
appears in the display.
➮ Press button 3	> again to
➮ Press button 3	> again to
cancel pause.
Switching radiomonitor on/off
Switching radiomonitor on/off		PORTUGUÊS
➮ Keep pressing the button :		PORTUGUÊS
➮ Press the MENU button 8.

until “RM ON” or “RM OFF”
until “RM ON” or “RM OFF”
appears in the display.
➮ Press the or	button : to

switch radiomonitor on/off.

➮ When you have finished making your changes, press the MENU button 8 or OK ;.

You can automatically skip blank spac- es on the tape that are longer than five seconds. To do so, you must first acti- vate the “blankskip” feature.

Switching blankskip on/off

➮Press the MENU button 8.

➮ Keep pressing the button : until “BLANKSKIP” appears in the display.