Switching ON/OFF, Switching on/off

SWITCHING ON/OFF

VOLUME ADJUSTMENT

Switching on/off

There are various ways of switching the unit on/off.

●Switching on/off using the vehicle ignition.

If the unit is correctly connected to the vehicle’s ignition, it will switch on/off si- multaneously with the ignition.

You can also switch the unit on even if the ignition is off.

➮To do so, press button 3 until the unit turns on.

Note:

To protect the vehicle battery, the unit will switch off automatically after one hour.

●Switching on/off using the remov- able control panel.

➮Remove the control panel. The unit switches off.

➮Attach the control panel again.

The unit switches on. The settings (ra- dio, cassette or CD changer) that were set before the unit was switched off will be reactivated.

●Switching on/off using button 3.

➮To switch the unit on, press button

➮To switch the unit off, press button 3 for longer than two seconds.

The unit switches off.

Volume adjustment

The system volume can be adjusted in steps from 0 (off) to 66 (maximum).

➮To increase the system volume, turn the volume control to the right.

➮To decrease the system volume, turn the volume control to the left.

Setting the power-on volume

You can set the unit’s default power-on volume.

➮Press the MENU button 8.

➮Press the button :.

“ON VOLUME” appears in the display.

➮Set the power-on volume using the and buttons :.

If you set the power-on volume to 0: every time you turn the unit on, the pow- er-on volume will be the same as the volume level that was set before the unit was last switched off.

Risk of serious injury.

If the power-on volume is set to max- imum, the volume level can be very high when the unit is switched on. This can cause hearing damage.

If the volume was set to maximum before the unit was switched off and the power-on volume is set to 0, the volume level can be very high when the unit is switched on again. This can cause hearing damage.