RADIO MODE
Switching REGIONAL on/off
➮Press the MENU button 8.
➮Press the or button 7 re- peatedly until “REG” appears in the display. “OFF” or “ON” is dis- played alongside “REG”.
➮To switch REGIONAL on/off, press the or button 7.
➮Press the MENU button 8.
Selecting the waveband / memory bank
This device can receive programmes broadcast over the FM frequency range as well as the MW and LW (AM) wavebands (MW and LW only on the Malaga CD36). There are three mem- ory banks available for the FM wave- band (FM1, FM2 and FMT) and one for each of the MW and LW wave- bands. Six stations can be stored in each memory bank.
To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,
➮briefly press the BND•TS button
;.
Tuning into a station
There are various ways of tuning into a station.
Automatic station seek tuning
➮Press the or button 7.
The radio tunes into the next receiva- ble station.
Tuning into stations manually
You can also tune into stations manu- ally.
Note:
●You can only tune into stations manually if the RDS function is deactivated.
➮Press the or button 7.
Browsing through broadcasting networks (only FM)
If radio stations provide several pro- grammes, you have the option of browsing through their “broadcasting networks”.
Note:
●The RDS function must be activat- ed before you can use this fea- ture.
➮Press the or button 7 to switch to the next station on the broadcasting network.
Note:
●When using this feature, you will only be able to switch to stations that you have received once be- fore already. To receive the sta- tions, use the scan function or the Travelstore function.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations provid- ing good reception or whether it can also tune into those with a weak re- ception.
➮Press the MENU button 8.
32