Selecting the frequency range / memory

RADIO MODE

This unit can receive programmes broadcast over the FM, MW and LW fre- quency ranges.

Note:

●The MW and LW frequency ranges are not available on the Konstanz CD31.

There are three preset memory levels for the FM range and one for each of the MW and LW ranges. Five stations can be stored on each memory level.

Selecting the memory level

To switch between the FM memory lev- els and the MW and LW frequency rang- es,

➮keep pressing the FMT or BAND (TS) button 2 until the required frequency range / memory level is displayed.

Setting the sensitivity of the station search mode

You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak re- ception.

➮Press the MENU button :.

➮Keep pressing the or button 9until “SENS” appears in the dis- play.

➮Press the button 9.

The display shows the currently set val- ue for sensitivity.“SENS HI6” means that the tuner is highly sensitive.“SENS LO1” means it is set to the lowest sensitivity setting.

If “SENS LO” is selected, “lo” lights up in the display.

➮Set the required sensitivity using the and buttons 9.

➮Press the MENU button :.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS

Tuning into a station

There are various ways of tuning into a station.

Automatic seek tuning

➮Press the or button 9.

The unit tunes into the next receivable station.

Tuning into stations manually

You can also tune into stations manual- ly.

Note:

●You can only tune into stations manually if the RDS function is de- activated.

➮Press the or button 9.

Browsing through broadcasting networks (only FM)

If a radio station provides several pro- grammes, you have the option of brows- ing through its so-called “broadcasting network”.

SVENSKA ESPAÑOL PORTUGUÊS