CD MODE
CD mode
You can use this unit to play standard CDs with a diameter of 12 cm.
Risk of damage to the CD drive! CD singles with a diameter of 8 cm and contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any dam- age to the CD drive that may occur as a result of the use of unsuitable CDs.
Switching to CD mode
●If there is no CD inserted in the drive.
➮Gently insert the CD with the print- ed side uppermost into the CD compartment until you feel some resistance.
The CD will be drawn automatically into the drive.
Do not use force when inserting the CD. You must not hinder or assist the drive as it draws in the CD.
CD playback begins.
●If a CD is already inserted in the drive.
➮Keep pressing the CD•C button 7 until “CD” appears in the display.
Playback begins from the point at which it was last interrupted.
Selecting tracks
➮Press one of the 
/ 
or 
/ 
but- tons 9 to select the next or previ- ous track.
If you press the 
/ 
button 9 once, the current track will be played again from the beginning.
Quick track selection
To quickly select tracks backwards or forwards,
➮keep one of the 
or 
buttons 9 pressed until
Fast searching (audible)
To fast search backwards or forwards,
➮keep one of the 
buttons 9 pressed until fast reversing / fast forwarding begins.
Random play (MIX)
➮Press button 4 (MIX) ;.
MIX appears in the display. The next randomly selected track will then be played.
Stopping MIX
➮Press button 4 (MIX) ;again. MIX disappears from the display.
Scanning tracks (SCAN)
You can briefly play all the tracks on a CD.
➮Press the SCAN button 4.
Note:
●You can set the scantime. For fur- ther details, read the section enti- tled “Setting the scantime” in the “Radio mode” chapter.
38