RADIO OPERATION
As soon as a station of the selected type is found, the device switches from the present station, or out of CD, cassette tape, MiniDisc or CD changer mode (depending on how your radio is equipped) to the station with the se- lected program type.
Activating PTY
To use the PTY function:
➮Press the TUNE button, >, when the radio is operating.
The radio function menu is shown on the dis- play.
➮Press the softkey, 4, indicating “PTY”.
When PTY is switched on, the display briefly shows the last program type that was select- ed. “PTY” appears in the display.
To return to the basic radio menu:
➮Press the TUNE button, >, or wait for eight seconds. The settings are then saved.
Deactivating PTY
➮Press the TUNE button, >, when the radio is operating.
The radio function menu is shown on the dis- play. “PTY” appears in the display.
➮Press the softkey, 4, indicating “PTY”. “PTY” disappears from the display.
To return to the basic radio menu:
➮Press the TUNE button, >, or wait for eight seconds. The settings are then saved.
Selecting the program type and starting the search
➮Press the 
or
button, 7.
The current program type is shown on the display.
To change to a different program type:
➮Press the
or
button, 7, until the desired program type is displayed.
Or
➮Select a saved program type by press- ing one of the softkeys, 4, indicating “ST1”
The selected program type is briefly displayed. In order to start the search:
➮Press the 
or 
button, 7.
The next receivable station with the selected program type is tuned in.
Note:
If no station is found with the chosen program type, a beep is heard and the display briefly shows “NO PTY”. The tuner returns to the most recently received station.
Storing program type on station buttons
➮Select a program type with the
or
button, 7.
➮To save a program type, hold down one of the softkeys, 4, indicating “ST1” to “ST6”, for longer than one second.
The program type is saved at the chosen lo- cation.
Optimising radio reception
Treble cut in the presence of interference (HICUT)
The HICUT function improves the sound when radio reception is poor. When interfer- ence is being received, the treble is automat- ically cut which also reduces the level of in- terference.
Setting HICUT
➮Press the MENU button, 8.
➮Press the 
or 
button, 7, until “HI- CUT” appears in the display.
➮Press the 
or
buttons, 7, to adjust the HICUT function.
“NO HICUT” means that the function is inac- tive, while “HICUT 3” indicates the strongest automatic reduction of treble and interference.
16