Blaupunkt Hamburg CD70 Clock Time, Setting the time, Selecting 12/24-hour clock mode

Page 24

TIME

CLOCK - Time

Setting the time

The clock time can be automatically set by means of the RDS signal. If you cannot re- ceive an RDS station, or if the RDS station to which you are listening does not support this function, it is also possible to set the time manually.

Having the time set automatically

In order to have the time set automati- cally, press the MENU button, 8.

Press the or button, 7, as often as is necessary for “CLK MAN” (manu- al) to appear in the display.

If “CLK AUTO” is displayed, automatic time setting is already active.

Press the button, 7, as often as is necessary for “CLK AUTO” to appear in the display.

Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.

If “CLK AUTO” has been selected and a sta- tion with the RDS time function (RDS-CT) is received, the clock is automatically adjusted.

Setting the time manually

In order to adjust the time, press the MENU button, 8.

Press the or button, 7, as often as is necessary for “CLOCKSET” to ap- pear in the display.

Press the or button, 7.

The time is shown on the display. The hours blink and can be adjusted.

Adjust the hours with the / button,

7.

When the hours have been set, press the button, 7.

The minutes blink.

Adjust the minutes with the / but- ton, 7.

Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

Selecting 12/24-hour clock mode

Press the MENU button, 8.

Press the or button, 7, as often as is necessary for “24 H MODE” or “12 H MODE” to appear in the display.

Press the or buttons, 7, to switch between the modes.

Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

Having the time displayed constantly when the device is switched off

If you want the time to be displayed when the device is switched of and the

ignition is switched on, press the MENU button 8.

Press the or button, 7, as often as is necessary for “CLK OFF” or “CLK ON” to appear in the display.

Press the or button, 7, to switch between the display being ON or OFF.

Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

24

Image 24
Contents Hamburg CD70 Phoenix CD70 Open here Ouvrir s.v.p Por favor, abrir Favor abrir 14 13 Operating Elements Contents Road safety AccessoriesGuarantee FittingKeyCard Theft Protection Inserting the KeyCardRemoving the KeyCard Replacing KeyCards / Training a second KeyCardKeyCard lost or damaged Training a new KeyCard Entering the master codeVisual theft protection LED Switching on and off Switching on and off with the buttonSwitching on and off with the vehicle ignition Switching on and off with the KeyCardAdjusting the volume Adjusting the switch-on volumeAdjusting the volume for the confirmation tone beep MutingTone and volume Adjusting the display Adjusting the viewing angleAdjusting the display brightness Switching to Radio Mode Radio OperationRDS Function Tuner AlternativeSetting the station Setting station search sensitivitySaving a station Saving a station automatically TravelstoreSetting sample duration Scantime Scanning through stationsProgram type PTY Optimising radio reception Switching between stereo and mono Setting the tunerChanging information displayed CD operation Changing the display contents Repeating tracks RepeatProgramming favourite CD tracks Naming CDs Delete the list of favourite tracks for a CD changer operation OptionalSampling all tracks on all CDs Scan Programming favourite CD tracks Setting the time Selecting 12/24-hour clock modeClock Time Equalizer Equalizer adjustment guide Level meter / SpectrometerSwitching the AUX input on and off Switch-on delay for external pre- amplifiersExternal audio sources Pre-amplifier / suboutTechnical data AmplifierTuner Pre-amp OutBlaupunkt-Werke GmbH