Bass
Treble - Adjust from +7 to
Balance - Adjust balance from 9 (all the way left) using + to
Fader - Adjust fader from 9 (sound only from the front) using + to
Loudness (LD)
Press LD to increase sound of low and high frequencies. LOUD icon appears. To cancel, press LD again.
Radio Operation
Last Station Memory
Each FM bank and AM band has its own last station memory which holds
Selecting Bands
Press SRC as needed to access FM1, FM2, FM3/FMT, AM/AMT banks.
Seek Tuning
Press /\ or V to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity requirements predetermined by sensitivity set through SENS/LD button.
Tuning Sensitivity (SENS)
Press SENS/LD for more that 2 seconds to switch between local (lo) and distant search sensitivity. When “lo” is absent from the display, search sensitivity setting is distant.
Radio Reception Hints
•When listening to weak or distant AM stations, adjusting the Treble to minimum
•In general, set SENS to distant tuning if in rural areas or where stations tend to be weak and distant, and to local tuning when in metropolitan areas or areas where stations tend to be strong and local.
Stereo Symbol
Stereo symbol turns on if a stereo station with an incoming signal of at least 20 dBμV is received. The unit gradually switches between mono to stereo automatically.
Manual Tuning
Press /\ or V for more than 1/2 second and frequency will go one channel/step in direction pressed. Press and hold causes continuous manual tuning. Unit returns to seek tuning mode after 4 seconds or after storing a station on a preset.
Preset Station Storage
After tuning desired frequency on desired band, press and hold a Preset Button for more than 2
14