Blaupunkt CR 24 Important information, What you need to know, Traffic safety

Page 6

Important information

Anti-theft coding

What you need to know!

Before starting to use your new car radio you should carefully read through the information on “Traffic safety” and “Anti-theft coding”.

Traffic safety

Traffic safety has always priority. Use your car radio in such a manner that you are always able to cope with and react to the prevailing traffic situation at any given time. Remember, even at 50 km/h you are still moving at a speed of 14 m per seconds.

It is also very important that you are able to hear, and react to, acoustic warning signals around you, for example from the police or the firebrigade.

Therefore, adjust the volume reasonably.

Installation/connection

The code system can only be switched on and off, if the radio is connected to perma- nent power.

If you like to install your new car radio by yourself or add other audio components to the existing ones, then please read carefully the enclosed instructions on installation and connection.

Do not connect the loudspeaker outputs to ground!

Only use the accessory and replacement parts approved by Blaupunkt.

The car radio comes standard with the code system deactivated.

If the anti-theft coding system is on while the power supply to the unit is interrupted (e.g. theft, disconnecting the car battery), the set is electronically blocked. Then it may only be used again after the appropriate code num- ber has been entered (see car radio pass- port).

Wrong code number entered

It should not be possible for thieves to ascer- tain the code number by trial-and-error. This is why the set will be blocked for a certain period of time, if an incorrect code number is entered. In this case, “- - -” will appear in the display.

This waiting time is 10 seconds after the first three attempts, and 1 hour following subse- quent attempts.

After 19 unsuccessful attempts, “OFF” will appear in the display and the set can no longer be restarted.

Note:

Keep you car radio passport with the code number in a safe place in order to avoid “unauthorized access” to your car radio.

16

Image 6
Contents Augsburg CR Page Contents Short description Presets 1, 2, 3, 4, 5 To change the search sensitivity press loTo change the memory bank Important information Traffic safetyInstallation/connection What you need to knowSwitching the code system on Power supplySwitching the code system off Restart following interruptionRadio operation Adjusting the station search sensitivityStereo mono switch Changing the memory bankSampling stations briefly With Preset-ScanRecalling stored stations With Radio-ScanTraffic messages ARI Switching the traffic messages ARI on and offSwitching the warning beep off Automatic search startInserting the tape Adjusting the volume for traffic messages and warning beepTape operation Fast tape runAutoreverse function Technical dataAppendix CassetteBlaupunkt-Werke GmbH