Radio operation
With this car radio you can receive FM fre- quencies ranging from 87.5 to 108 MHz.
Station search
•Press 
/
, the car radio will then auto- matically tune into the next station.
If you hold the upper or lower part 
/
of the rocker switch depressed, the search function will forward quickly in the corresponding di- rection.
| Station search |
| up |
down in | up in |
short intervals | short intervals |
down
Manual station search << >>
•Press << or >>, the frequency will then move up or down in short intervals.
If you hold the rocker switch depressed, then the frequencies will move up or down more quickly.
Adjusting the station search sensitivity
You can adjust the sensitivity of the automa- tic station search.
For this,
•press lo.
When “lo” is visible in the display, then only those stations with relatively strong signals will be picked up (low sensitivi- ty).
When “lo” is not visible in the display, then stations with weaker signals will also be picked up (high sensitivity).
Stereo - mono switch
You can switch to mono when the reception conditions are only poor:
•Press lo for approximately 2 seconds. During mono reception the stereo sign 
will go out in the display.
Each time the car radio is switched on, the reception will automatically be set to stereo. The radio will automatically shift to mono when the reception conditions are poor.
Changing the memory bank
You can shift between the memory banks I, II,
IIIand T to store and recall the stored sta- tions.
The selected memory bank is indicated in the display.
• Press FM•T until the desired memory bank is indicated in the display (press repeatedly if necessary).
Storing stations
For each memory bank (I, II, III, T) you can store up to six stations using the preset buttons 1, 2, 3, 4, 5, 6.
•Select the memory bank by pressing FM•T.
•Use the rocker switch to tune in a stati- on (either automatically or manually).
•Press the desired preset button and hold it. First the station will be muted and then becomes audible again (after approximately 2 seconds).
Now the station has been stored in the re- spective memory bank.
The activated preset button is indicated in the display.
18