Lexmark 560n manual Adjusting copy quality, Making a copy lighter or darker

Adjusting copy quality

Choose between Enhanced (best quality) or Standard (fastest speed). To change the quality setting:

1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

2If you are loading a document into the ADF, adjust the paper guides.

3From the printer control panel, press Copy.

4Use the keypad to enter the number of copies.

5To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose between B&W (black and white) and Color.

6Press or repeatedly until Output Quality appears, and then press OK.

7Press or repeatedly until Standard or Enhanced appears, and then press OK.

8Press Start to begin copying.

Making a copy lighter or darker

To lighten or darken an image when it is copied:

1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

2If you are loading a document into the ADF, adjust the paper guides.

3From the printer control panel, press Copy.

4Use the keypad to enter the number of copies.

5To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose between B&W (black and white) and Color.

6Press or repeatedly until Lighten/Darken appears, and then press OK.

7Press or repeatedly to lighten or darken the image, and then press OK.

8Press Start to begin copying.

Adjusting the sharpness of a copy

To adjust the sharpness of the copied image:

1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

2If you are loading a document into the ADF, adjust the paper guides.

3From the printer control panel, press Copy.

4Use the keypad to enter the number of copies.

Copying

65