Menu item

Protocol

LPR

Disable

Enable

Port9100

Disable

Enable

FTP

Disable

Enable

SNMP

Disable

Enable

Email Alerts

Disable

Enable

Web Server

Disable

Enable

Bonjour(mDNS)

Disable

Enable

IP Filter

<list of IP filters>

Initialize NVM

Yes

No

Adobe Protocol

Auto

Standard

BCP

TBCP

Binary

Description

Specifies which network protocol to use

Note: Enable is the factory default setting.

Specifies blocking the reception of data from certain IP addresses. You can block up to five IP addresses. The change becomes effective after the printer is turned off and then on again.

Note: This feature is available only when using LPD or Port9100.

Initializes network data stored in NVM. After executing this function and rebooting the printer, all network settings are reset to the factory default settings.

Specifies PostScript communication protocol for each interface. You can configure the Adobe Protocol settings for the network. The change becomes effective after the printer is turned off and then on again.

Note: Auto is the factory default setting.

Understanding printer menus

135

Page 135
Image 135
Lexmark 560n manual 135, IP Filter, Initialize NVM, Adobe Protocol