Installing a multi-protocol network card

The system board has one connection for an optional multi-protocol network card.

CAUTION—SHOCK HAZARD: If installing a network card after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing.

Warning—Potential Damage: System board electrical components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

1Access the system board.

2Unpack the network card.

Note: Avoid touching the connection points along the edge of the card.

3Holding the network card by its sides, align the connector on the card with the connector on the system board.

Installing options

35

Page 35
Image 35
Lexmark 560n manual Installing a multi-protocol network card